CEECOACH PLUS Quick Start Guide

Getting Started
DUO set devices are already connected to each other in the box. To create a new connection, see "Group Creation".


1. Press and hold the middle "o" button until the LED light appears. You will hear "power on" in the headphones.

2. The LED flashes slowly in one position. You will hear "device connected" in the headphones – the devices are ready to use.

👥 Group Creation To create a new group between devices, a reset must first be done, see "Reset". Up to 16 devices can be joined into one group.


GROUP CREATION:

    1. Turn on the devices, the white LED flashes slowly in one position (devices are not connected).

    2. Press and hold the side buttons until the LED appears, repeat the same with all devices.

    3. The devices connect to each other and the LED starts flashing green slowly. You will hear "device connected" in each device.

    NB! All devices must be within a 10m radius. You have 10 seconds from one device to the next to connect them to each other.

    If the light flashes white, then group creation was not successful and the steps must be repeated.
    🔇 Mute Function Both the trainer and the student can put themselves into mute mode.

    1. To turn it on: press the middle "o" button once. The LED turns purple and you will hear "mute on".

    2. To turn it off: press the middle "o" button once. The purple LED disappears and you will hear "mute off".

    🔐 Key Lock Key lock helps prevent unwanted button presses.

    1. To turn it on: press and hold "+ and -" until you hear "key lock on". The LED flashes at the 3, 6 and 12 o’clock positions.

    2. To turn it off: press and hold "+ and -" until you hear "key lock off". The device returns to normal mode.

    📶 Connecting Bluetooth Headphones

    1. Put the Bluetooth headphones into pairing mode (according to the manufacturer’s instructions).

    2. Press and hold 1 side button (the smooth button) until the LED ring starts flashing blue.

    3. Place the devices next to each other. When the green LED appears, the devices are connected and ready to use.

    🎧 Connecting Wired Headphones
    1. Insert the selected wired headphone plug into the device.
    ⏻ Powering Off

    1. Press and hold "o" the button until the LED turns off and you hear "power off".

    🎨 Meaning of LED Colors
    • Red: battery charge is below 30%
    • Yellow: battery charge is between 30% - 70%
    • Green: battery is more than 70% charged. The device is connected to at least 1 other device.
    • Blue: the device is ready to connect via Bluetooth
    • Bluish green (cyan): the device is connected to another device, but that device is out of range
    • Purple: mute function is on
    • White: no connection to other devices
    🔄 Reset
    Function for disconnecting previous connections both between other CEECOACH devices and Bluetooth devices.

    1. Turn on the devices, see "Getting Started".

    2. Press and hold "+, -, o" buttons at the same time until the LED ring turns white. The device will then switch off. Reset is complete.

    Attaching the Belt Clip
    Attaching the Velcro Strap
    📘 Full User Manual
    Open here
    ©2026, CLARICO OÜ – KÕIK ÕIGUSED KAITSTUD.
    Jälgi meid:

    TULE LIIKMEKS

    Liitu CEECOACH kogukonnaga ja saa osa parimatest pakkumistest!